triumphs
[Top] [All Lists]

Re: Six Tech manual question

To: ak627@dayton.wright.edu, triumphs@Autox.Team.Net
Subject: Re: Six Tech manual question
From: TRIPHSTEVE@aol.com
Date: Thu, 17 Apr 1997 01:46:02 -0400 (EDT)
Tom Tweed and fellow listers:


Tom asked me about an alternative and better front wheel bearing seal for
TR250's and TR6's. I have his copy of  Six Tech. That is the reason he asked
me to reply, not to be confused with my knowledge or skill level.

Six Tech points out that there is a modern seal which can be used and seems
to work. The correct seal is CR Industries 13612. However, a problem arises
in that CR Industries makes 2 types of 13612. One is shaped like a
conventional seal.  The one you need, or he recomends,  is a  type HM 21. Six
Tech indicates that it should be available from any bearing supplier listed
in the yellow pages.

I hope this helps.


Steve Thornton
Bowling Green, KY

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Six Tech manual question, TRIPHSTEVE <=