In a message dated 97-04-09 19:12:19 EDT, thefryes@iconn.net (Henry Frye)
writes:
> When the pedal is depressed, the clutch disengages. But when you put her
> > > in gear and let out the clutch, the clutch doesn't engage promptly.
Had the same problem. When I did the gas/clutch drill - i.e. simultaneously
down on the gas pedal/up on the clutch pedal - there was a lag until the
clutch engaged. It was the hose between the master and slave cylinders.
Bought a new one from TRF, installed it and no more problem. Now, you might
have other problems as well, I was lucky that I did not. Good luck.
Art Kelly '64TR4 CT33118L
|