>Date: Mon, 31 Mar 1997 07:26:16
>To: Henry Frye <thefryes@iconn.net>
>From: ron botting <rcbotting@mindlink.bc.ca>
>Subject: Re: Poly Bushings for a TR3?
>
>At 08:14 AM 31/03/97 -0500, you wrote:
>>Greeting all,
>>
>>As work goes on with the TR3B, I am again in need of the wisdom of the
>>list...
>>
>>I am eyeing my front end bushings, or what is left of them, and know I
>>need to rebuild the entire front end. I browsed my archives for the
>>recent thread on polyurethane and nylatron bushings, but from what I can
>>tell the thread applied to TR6's.
>>
>>Any advice on what type of bushings to use on a TR3?
>>--
>
>Henry.
>
>many will recommend the polyurethane as they offer a firmer and more
durable bushings. While recently rebuilding the front end on my '57 TR3A,
acting on everyones' advise I ordered the Poly units from MOSS even though I
had received standard units in my front end re-build kit, Why ?....because I
had it apart !
>
>rgds
>rcb
>
>
Ron Botting
Surrey, B.C. Canada
rcbotting@mindlink.bc.ca
57' TR3A (TS23731)
|