Ok tranny is on the floor, Guess what, the ring gear looks like it has full
life left to it, but it had slide further away from the starter gear.
While I pounded it back on and could most likely reinstall every thing I was
woundering if any body could tell me how to get the flywheel off ,so that I
could turn the ring gear around the way it was meant to be not the way the
factory left it.
If I try turning the bolts holding the flywheel on the motor turns and all I
do is go round and round , short of sticking a screw driver down a plug hole
and wedging the piston I can't come up with a way, just kidding on the
screwdriver?
Chet
|