John,
Poly is the way to go. Rubber will rot after a period of time if you don't use
it
as a daily driver.I put poly in my 250 and it really makes a differance in the
stiffness in the car. I like the feel of the car with the poly bushings.The
rack
I used aluminum blocks and wished I put poly instead. You get to much
road vibration through the steering wheel.Hope this helps on your decision.
Kevin Andrews
Siler City,NC
TR-250(CD7766L)
----------
From: John Ruppert[SMTP:jcr01@americanisuzu.com]
Sent: Monday, November 25, 1996 8:51 AM
To: triumphs@autox.team.net
Subject: 73 TR6 Suspension rebush
In the process of rebuilding the front end of my 73 TR6 and have a question
about the differences between the stock bushings and performance bushings.
Have seen several material types available and I'm wondering which would be
better.
I am interested in a tight feeling front end without sacrificing too much of
the ride quality. What do you guys and girls recommend?
John Ruppert
Ontario, CA
jcr01@americanisuzu.com
73 TR6 #CF 3889
|