triumphs
[Top] [All Lists]

Re: Removable Luggage Rack

To: triumphs@autox.team.net
Subject: Re: Removable Luggage Rack
From: ArthurK101@aol.com
Date: Fri, 6 Sep 1996 14:52:47 -0400
Since we seem to have a new thread going on luggage racks, I'm forwarding a
message which I wrote  some time ago in hope that maybe some one new (or old
) on the list can help.


In a message dated 96-03-26 23:22:07 EST, ArthurK101 writes:

>  I'm looking for a luggage rack which can be put on or taken off very
quickly 
> and which requires NO modifications to the trunk(boot) lid - i.e. a rack to

> use only when actually carrying luggage.  One did exist in the '60's -see 
> story below.
>  
>  Back in the '60's when my TR4 was new and was the family car, I bought a 
> simple, cheap aluminum luggage rack from Sears (I think).  It was strictly 
> utilitarian and was composed of two hollow tubular aluminum side pieces (
> shaped like  flattened "C"s) and four or five tubular aluminum cross pieces

> which fitted between the side pieces and were held to them with aluminum 
> screws.  There was another piece, also shaped like a flattened "C",  which 
> connected (so it formed a vertical plane) across the back and prevented any

> luggage from sliding off. The rack was big enough to hold a Samsonite
3-suiter
> tied on with bungy(Sp) cords.  When assembled the rack looked like most of
the
> racks you see in the catalogues except it was neither fancy nor pretty.
 But, it 
> could  be taken completely apart in less that 5 minutes so all that you had
were a 
> handful of hollow tubes which could be stored in the trunk (boot). (Or
under 
> a bed or in the corner of a closet if you had no space inside the car for
the 
> assembled rack.)
>  
>  But even better than the above -- the rack required no mounting bolts or 
> holes or suction cups ( a friend of mine tore a nice suction cup sized
paint 
> chip from his MG trunk lid by using a luggage rack with suction cups).  The

> rack which I had was held on by flat nylon straps running through plastic 
> encased metal clips (which looked like your fingers if you curl them at the

> second knuckle).  These clips hooked over the front and rear lips of the 
> trunk(boot) lid.  The rack just sat on the lid ( I put foam rubber feet on 
> the side pieces where they contacted the lid) and was held down by the four

> straps and the hooks.  This meant that you could put the rack on or take it

> off in a minute and never even know it had been used. 
>  
>  I sold the car in 1976 and the rack sat around in my garage for about 10 
> years.  We had a garage sale at that time and my other half insisted that I
"
> sell that damned thing which is just taking up room and not being used".
 So, 
> you got it, I sold it for 5 bucks.  Since my car returned to me in 1991, I
can't 
> find a rack like that anywhere.  BTW - this rack could be used for any TR 
> 2-8 or Spitfire since the straps are adjustable.  As I said it was strictly
a 
> utility rack - nothing fancy and very cheap and only used it when I had 
> luggage to haul - otherwise it was not on the car.
>  
>    SO - does anyone have an idea about whether that kind of rack is still 
> around and where I could obtain one.  Again the criteria is that it be 
> Quickly removeable and require NO modifications to the car itself nor any 
> tools to mount it.
>  
>  If not, does anyone know of a metal shop which might be interested in 
>  fabricating such a rack.  And - BTW - maybe some other people on the list
might 
>  be interested in obtaining one. 
>   
>  Art Kelly '64 TR4 CT 33118L (Original owner)




<Prev in Thread] Current Thread [Next in Thread>