triumphs
[Top] [All Lists]

Re: TR3 - Old Wiring Harness Wanted

To: cloughbt@batman.flight.wpafb.af.mil, triumphs@autox.team.net
Subject: Re: TR3 - Old Wiring Harness Wanted
From: JHarroun@aol.com
Date: Wed, 15 May 1996 10:40:36 -0400
Bruce,
You don't need an electrical system to start a TR-2/3, you just wire the
battery to the starter solenoid on one side and ground on the other.
 (Disconnect all the other wires from the starter solenoid just in case.)
 Run a jumper to the coil and push the solenoid button.  That's how I just
did it, and it worked fine.

Of course if you want to use the key it is a little more work...

Jim H

<Prev in Thread] Current Thread [Next in Thread>