In a message dated 96-05-09 20:42:26 EDT, examiner@nexusprime.org (Robert
Norway) writes:
>
>So, I'm back to thinking main bearing as I figured it only makes the
>noise with the pressure of the fan belt on it. Sound like an idea???
>
>Any thoughts on the subject would be very welcome. Thanks in advance.
>
>Cheers and Happy Motoring
>
>bob
>
>
Bob,
What else is driven by the belt?
The Alternator (or generator). It is quite possible that the bearings in the
alternator have gone bad (or just dry). Check this out before you drop the
oil pan.
In response to Rich Jackson's reply:
I once drove an MGB which had the nut on the crank pulley but still had about
5 degrees of play. My guess is that the shaft key was too small and the
pulley could wiggle back and forth about 5 degrees - freely. Something else
to check.
Good Luck
Dave
TR6 Massey@aol.com
|