triumphs
[Top] [All Lists]

Re[2]: T H R E A D size...

To: mgs@autox.team.net, triumphs@autox.team.net, grayoak@holly.ColoState.EDU
Subject: Re[2]: T H R E A D size...
From: Mike A Gendimenico <Mike_A_Gendimenico@ccm.sc.intel.com>
Date: Tue, 24 Oct 95 13:27:00 PDT
Text item: 

Nick wrote:
/>This is all so I can pass emissions in 
/Colorado... >
/>I'm experiencing problems in finding a bushing to hold a pipe into a 
/>threaded hole normally used for the EGR valve connection into the exhaust 
/>manifold on the 1500cc engine.
/>
/>The machine shop removed a piece of threaded "something" that had been 
/>filled in with welding to prevent exhaust gases from leaking out. 
/>Anyway, they said it was 3/4 inch, 14 threads per inch.  Is this 
/>available anywhere stateside???

   /This is most likely the standard pipe thread size (3/4-14npt) which is
/actually tapered slightly, hence a standard bolt thread will seem to "bind 
/up" after a few turns, when it started out "loose".

/>Secondly I need to find some kind of heat proof pipe to go from this 
/>junction in the manifold to an air pump inconveniently mounted on the 
/>opposite side of the engine.

If this is the case, you can buy a fitting with pipe thread on one end and 
a compression fitting on the other end, where you can insert metal tubing 
of choice.  If you can't find it in a good hardware store, then go to a 
place that sells industrial valves and fittings.

Mike

Text item: External Message Header

The following mail header is for administrative use
and may be ignored unless there are problems.

***IF THERE ARE PROBLEMS SAVE THESE HEADERS***.

Subject: Re: T H R E A D size...
To: mgs@autox.team.net, triumphs@autox.team.net,
        Nick Benson <grayoak@holly.ColoState.EDU>
From: "jpratchi" <jpratchi@isdlink1.ess.harris.com>
Date: Tue, 24 Oct 95 07:22:23 est
Received: (from majordom@localhost) by triumph.cs.utah.edu (8.6.10/) id HAA19684
 for triumphs-outgoing; Tue, 24 Oct 1995 07:22:45 -0400
Received: from localhost (daemon@localhost) by triumph.cs.utah.edu (8.6.10/) wit
h SMTP id HAA19725; Tue, 24 Oct 1995 07:23:12 -0400
Received: from triumph.cs.utah.edu by hermes.intel.com (5.65/10.0i); Tue, 24 Oct
 95 04:23:18 -0700
Received: from hermes.intel.com by ccmgate1.sc.intel.com with smtp
     (Smail3.1.28.1 #3) id m0t7hO1-000S0Ya; Tue, 24 Oct 95 04:19 WET DST

<Prev in Thread] Current Thread [Next in Thread>