Re: Starter whirrs<951008102338_118864243@emout06.mail.aol.com>

["Richard Jackson - Network Technician ext. 2570"<RICHARD.JACKSON@nene.ac.uk>]

Brian wrote :-

(snip)
>Unfortunately, the end of the mechanism is not that easy to undo for total
>disassembly because the parts are usually brazed on.  But you can lube it
>without taking the assembly off the starter.  Just rotate the parts up and
>down the shaft and apply grease.
(snip)

I personnally thought that it was best not to grease the asssembly as this
would collect dirt and cause it to clog up again, it is best to use a fine
graphite powder or something like that.

Rich