I'm at a loss... I don't know which bolts go through the frame. I know that
there is a differential and the bolts are welded to the cross member of the
frame. Can you be more specific?
>While driving home yesterday, my passenger noticed that the bolts which go
>through the chassis to the frame where the rear end mounts (under the rear
>seat if I had a rear seat) were loose and moving up and down 1/16" over every
>bump. I tried to tighten them but the nuts which are welded to the frame
>were stripped. I put a nyloc on each bolt and fixed the problem. We checked
>my friends TR6 and it had the same problem. You may want to check yours.
>
>John Mardesich
>'68 TR250, Marin County, CA
>
>
|