Re: [Tigers] 90 degree oil filter adaptor

[Terry Lawell via Tigers <tigers@autox.team.net>]

This is a multi-part message in MIME format.
--===============7126855656172154970==
 boundary="------------050402080509060903080607"

This is a multi-part message in MIME format.
--------------050402080509060903080607
Content-Transfer-Encoding: 8bit

I will do that!

Terry


On 7/3/21, 4:27 PM, Gary wrote:
> When you get this all figured out, how about
> taking some pictures and giving us the
> Summit part numbers.  Itâ??s way past the time
> that I should have replaced the rubber hose
> in my remote setup.
> Gary
>
>
> Sent from my iPhone
>
>> On Jul 3, 2021, at 12:50 PM, Stu via Tigers <tigers@autox.team.net> 
>> wrote:
>>
>> 
>> Yes, Fram ph3600 or Ford FL400 will fit without grinding the engine 
>> mount.
>>
>> On Sat, Jul 3, 2021, 3:41 PM Terry Lawell <tlawell@austin.rr.com 
>>
>>     Hi Ron,
>>
>>       It turns out Summit had the right adapter for the kit, the sales
>>     person just didn't know it. They have sent the adapter to me and
>>     it fits
>>     correctly in the block as well as in the kit. The only problem
>>     was the
>>     oil filter they sent me was incorrect - it hits up against the
>>     oil pan.
>>     Is it the ph3600 that is slimmer and fits that kit?
>>       I also found another problem - the oil line from the oil pressure
>>     gauge was cracked and leaking. when I disconnected the oil line
>>     fitting,
>>     I also took off the fitting that goes into the block. It was very
>>     difficult to get off and I am concerned that someone either put a
>>     fitting in there with the wrong threads or stripped the threads when
>>     they installed it. Do you know what size those threads are? It
>>     appears
>>     to be a british standard pipe thread. I had to use whitworth
>>     wrenches to
>>     get both the pressure fitting nut and the fitting to the block
>>     off. Any
>>     info on these fittings would be much appreciated.
>>
>>     Cheers, Terry
>>
>>
>>     On 7/3/21, 7:45 AM, Ron Fraser wrote:
>>     > Terry
>>     >       1st -  I would contact Summit to make sure that oil
>>     filter kit did
>>     > not come with an adaptor or if it is missing from your kit.
>>     > 2nd -  does Summit have the adaptor needed for this kit?
>>     >
>>     > C20Z 6890-C seems to be the Ford part number for the adaptor -
>>     3/4 x16
>>     > thread and 1 1/16 x 12 thread
>>     > You need to check that this is correct for your oil filter kit.
>>     >
>>     >
>>     
>> https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&;
>>     > top_parent=200001&year=
>>     >
>>     > see if 6890-A is the part you need.
>>     >
>>     > Ron Fraser
>>     >
>>     > -----Original Message-----
>>     > From: Tigers <tigers-bounces@autox.team.net
>>     > Tigers
>>     > Sent: Thursday, July 01, 2021 8:34 PM
>>     > Subject: [Tigers] 90 degree oil filter adaptor
>>     >
>>     > I purchased a 90 degree oil filter adapter from Summit Racing
>>     and when it
>>     > arrived I realized it did not have the adapter for the block,
>>     though the
>>     > salesman told me it came with it. Does anyone know where I can
>>     get the
>>     > adapter? I think it is 1.16" threads to the block and 13/16"
>>     threads to the
>>     > adapter.
>>     >
>>     > Cheers, Terry
>>     > _______________________________________________
>>     >
>>     >
>>     > Donate: http://www.team.net/donate.html
>>     > Archive: http://www.team.net/pipermail/tigers
>>     http://autox.team.net/archive
>>     >
>>     > Unsubscribe:
>>     > http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
>>     >
>>     >
>>     >
>>
>>     _______________________________________________
>>
>>
>>     Donate: http://www.team.net/donate.html
>>     Archive: http://www.team.net/pipermail/tigers
>>     http://autox.team.net/archive
>>
>>     Unsubscribe:
>>     http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com
>>
>>
>> _______________________________________________
>>
>> tigers@autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers 
>> http://autox.team.net/archive
>>
>> Unsubscribe: 
>> http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>>
>>


--------------050402080509060903080607
Content-Transfer-Encoding: 8bit

<html>
  <head>
    <meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    I will do that!<br>
    <br>
    Terry<br>
    <br>
    <br>
    <div class="moz-cite-prefix">On 7/3/21, 4:27 PM, Gary wrote:<br>
    </div>
    <blockquote
      cite="mid:BAD32809-EEFC-45E5-B923-E1A50888E4C0@comcast.net"
      type="cite">
      <meta http-equiv="content-type" content="text/html; charset=UTF-8">
      When you get this all figured out, how about
      <div>taking some pictures and giving us the</div>
      <div>Summit part numbers.  Itâ??s way past the time </div>
      <div>that I should have replaced the rubber hose </div>
      <div>in my remote setup.</div>
      <div>Gary</div>
      <div><br>
        <br>
        <div dir="ltr">Sent from my iPhone</div>
        <div dir="ltr"><br>
          <blockquote type="cite">On Jul 3, 2021, at 12:50 PM, Stu via
            Tigers <a class="moz-txt-link-rfc2396E" 
href="mailto:tigers@autox.team.net";>&lt;tigers@autox.team.net&gt;</a> wrote:<br>
            <br>
          </blockquote>
        </div>
        <blockquote type="cite">
          <div dir="ltr">
            <div dir="auto">Yes, Fram ph3600 or Ford FL400 will fit
              without grinding the engine mount.</div>
            <br>
            <div class="gmail_quote">
              <div dir="ltr" class="gmail_attr">On Sat, Jul 3, 2021,
                3:41 PM Terry Lawell &lt;<a moz-do-not-send="true"
                  
href="mailto:tlawell@austin.rr.com";>tlawell@austin.rr.com</a>&gt;
                wrote:<br>
              </div>
              <blockquote class="gmail_quote" style="margin:0 0 0
                .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi
                Ron,<br>
                <br>
                Â  It turns out Summit had the right adapter for the kit,
                the sales <br>
                person just didn't know it. They have sent the adapter
                to me and it fits <br>
                correctly in the block as well as in the kit. The only
                problem was the <br>
                oil filter they sent me was incorrect - it hits up
                against the oil pan. <br>
                Is it the ph3600 that is slimmer and fits that kit?<br>
                Â  I also found another problem - the oil line from the
                oil pressure <br>
                gauge was cracked and leaking. when I disconnected the
                oil line fitting, <br>
                I also took off the fitting that goes into the block. It
                was very <br>
                difficult to get off and I am concerned that someone
                either put a <br>
                fitting in there with the wrong threads or stripped the
                threads when <br>
                they installed it. Do you know what size those threads
                are? It appears <br>
                to be a british standard pipe thread. I had to use
                whitworth wrenches to <br>
                get both the pressure fitting nut and the fitting to the
                block off. Any <br>
                info on these fittings would be much appreciated.<br>
                <br>
                Cheers, Terry<br>
                <br>
                <br>
                On 7/3/21, 7:45 AM, Ron Fraser wrote:<br>
                &gt; Terry<br>
                &gt;Â  Â  Â  Â 1st -Â  I would contact Summit to make sure
                that oil filter kit did<br>
                &gt; not come with an adaptor or if it is missing from
                your kit.<br>
                &gt; 2nd -Â  does Summit have the adaptor needed for this
                kit?<br>
                &gt;<br>
                &gt; C20Z 6890-C seems to be the Ford part number for
                the adaptor - 3/4 x16<br>
                &gt; thread and 1 1/16 x 12 thread<br>
                &gt; You need to check that this is correct for your oil
                filter kit.<br>
                &gt;<br>
                &gt; <a moz-do-not-send="true"
href="https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&amp;";
                  rel="noreferrer noreferrer" 
target="_blank">https://www.npdlink.com/search/products?search_terms=fitting%2Boil%2Bfilter&amp;</a><br>
                &gt; top_parent=200001&amp;year=<br>
                &gt;<br>
                &gt; see if 6890-A is the part you need.<br>
                &gt;<br>
                &gt; Ron Fraser<br>
                &gt;<br>
                &gt; -----Original Message-----<br>
                &gt; From: Tigers &lt;<a moz-do-not-send="true"
                  href="mailto:tigers-bounces@autox.team.net";
                  target="_blank" 
rel="noreferrer">tigers-bounces@autox.team.net</a>&gt;
                On Behalf Of Terry Lawell via<br>
                &gt; Tigers<br>
                &gt; Sent: Thursday, July 01, 2021 8:34 PM<br>
                &gt; To: <a moz-do-not-send="true"
                  href="mailto:tigers@autox.team.net"; target="_blank"
                  rel="noreferrer">tigers@autox.team.net</a><br>
                &gt; Subject: [Tigers] 90 degree oil filter adaptor<br>
                &gt;<br>
                &gt; I purchased a 90 degree oil filter adapter from
                Summit Racing and when it<br>
                &gt; arrived I realized it did not have the adapter for
                the block, though the<br>
                &gt; salesman told me it came with it. Does anyone know
                where I can get the<br>
                &gt; adapter? I think it is 1.16" threads to the block
                and 13/16" threads to the<br>
                &gt; adapter.<br>
                &gt;<br>
                &gt; Cheers, Terry<br>
                &gt; _______________________________________________<br>
                &gt;<br>
                &gt; <a moz-do-not-send="true"
                  href="mailto:tigers@autox.team.net"; target="_blank"
                  rel="noreferrer">tigers@autox.team.net</a><br>
                &gt;<br>
                &gt; Donate: <a moz-do-not-send="true"
                  href="http://www.team.net/donate.html"; rel="noreferrer
                  noreferrer" 
target="_blank">http://www.team.net/donate.html</a><br>
                &gt; Archive: <a moz-do-not-send="true"
                  href="http://www.team.net/pipermail/tigers";
                  rel="noreferrer noreferrer" 
target="_blank">http://www.team.net/pipermail/tigers</a>
                <a moz-do-not-send="true"
                  href="http://autox.team.net/archive"; rel="noreferrer
                  noreferrer" 
target="_blank">http://autox.team.net/archive</a><br>
                &gt;<br>
                &gt; Unsubscribe:<br>
                &gt; <a moz-do-not-send="true"
                  
href="http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com";
                  rel="noreferrer noreferrer" 
target="_blank">http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com</a><br>
                &gt;<br>
                &gt;<br>
                &gt;<br>
                <br>
                _______________________________________________<br>
                <br>
                <a moz-do-not-send="true"
                  href="mailto:tigers@autox.team.net"; target="_blank"
                  rel="noreferrer">tigers@autox.team.net</a><br>
                <br>
                Donate: <a moz-do-not-send="true"
                  href="http://www.team.net/donate.html"; rel="noreferrer
                  noreferrer" 
target="_blank">http://www.team.net/donate.html</a><br>
                Archive: <a moz-do-not-send="true"
                  href="http://www.team.net/pipermail/tigers";
                  rel="noreferrer noreferrer" 
target="_blank">http://www.team.net/pipermail/tigers</a>
                <a moz-do-not-send="true"
                  href="http://autox.team.net/archive"; rel="noreferrer
                  noreferrer" 
target="_blank">http://autox.team.net/archive</a><br>
                <br>
                Unsubscribe: <a moz-do-not-send="true"
                  
href="http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com";
                  rel="noreferrer noreferrer" 
target="_blank">http://autox.team.net/mailman/options/tigers/sabre2tgr@gmail.com</a><br>
                <br>
                <br>
              </blockquote>
            </div>
            <span>_______________________________________________</span><br>
            <span></span><br>
            <span><a class="moz-txt-link-abbreviated" 
href="mailto:tigers@autox.team.net";>tigers@autox.team.net</a></span><br>
            <span></span><br>
            <span>Donate: <a class="moz-txt-link-freetext" 
href="http://www.team.net/donate.html";>http://www.team.net/donate.html</a></span><br>
            <span>Archive: <a class="moz-txt-link-freetext" 
href="http://www.team.net/pipermail/tigers";>http://www.team.net/pipermail/tigers</a>
              <a class="moz-txt-link-freetext" 
href="http://autox.team.net/archive";>http://autox.team.net/archive</a></span><br>
            <span></span><br>
            <span>Unsubscribe:
              <a class="moz-txt-link-freetext" 
href="http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net";>http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net</a></span><br>
            <span></span><br>
            <span></span><br>
          </div>
        </blockquote>
      </div>
    </blockquote>
    <br>
  </body>
</html>

--------------050402080509060903080607--

--===============7126855656172154970==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________

tigers@autox.team.net

Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net



--===============7126855656172154970==--