Well Theo,
With your little board, I just cut a roughly V shape notch in the old
board (its too much trouble to remove
it entirely). Stock bulb now illuminates it the same as the stock
speedo. LEDs can be much brighter and
one could then actually use a "dimmer" function, not needed with stock
bulbs.
Do you still sell tach kits?  Mine is still working great.
Gary
On 11/5/2019 9:19 AM, Theo Smit via Tigers wrote:
> The tach (with the stock board) needs a lamp that directs the light upward at
> about a 45 to 60 degree angle, and most commercial LED bulbs are either
> straight to the side or straight up.
>
> I ended up making a one-off C shaped board with five LEDs on it, that mounted
> in the rear of the tach case. It provides great illumination but I never took
> it any further than that.
>
> Theo
>
>> On Nov 5, 2019, at 9:49 AM, Gary via Tigers <tigers@autox.team.net> wrote:
>>
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>
>
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|