This is a multi-part message in MIME format.
--===============5626859399477520656==
boundary="------------670E87EB1305627188DAC107"
Content-Language: en-US
This is a multi-part message in MIME format.
--------------670E87EB1305627188DAC107
Content-Transfer-Encoding: 8bit
In stock configuration (normal bulbs) with clean gauges, I find the full
bright position is the only one to use,
it's actually just about right. I wouldn't bother with a resistor if
you don't have the carbon block.
The only gauge that is waaayyy too dim is the Tach. It's problem is
that the circuit board inside blocks the
bulb light. If you update the electronics (like you should) with Theo's
kit, you can cut or remove the old
circuit board and have a visible tach at night.
Gary
On 11/5/2019 7:17 AM, Joe Brown wrote:
> I was wondering how you could get two levels of brightness out of
> that switch the way it is wired. IÂ never noticed a carbon block on
> the switch so it must fallen off in the past. I suppose a resistor
> could replace it but I have no idea what value to use or what contacts
> to put it across. I will probably just replace the switch with anÂ
> on-off switch.
>
> Thanks,
> Joe
>
> On Tue, Nov 5, 2019, 9:07 AM Gary via Tigers <tigers@autox.team.net
>
> The switch has a block of carbon that clips in. If its still
> there, poor contact makes the lights dimmer, if someone
>
> "put a penny in the fuse holder" it will have two bright
> positions. Bright is a british joke though. Dim and dimmer
>
> and off are the correct functions.
>
> Gary
>
>
> On 11/5/2019 6:50 AM, Warren Goodman via Tigers wrote:
>>
>> My newest old car has the same function. Dim and not as dim. I
>> have not seen Joe's but I bet he has softened the color of the
>> LEDs . My aftermarket previous owner installed LEDs are actually
>> on the verge of being annoyingly bright, " not Joe's brand."
>>
>> BTW the two position switch often has bad contacts. Some switches
>> will benefit from a electrical contact cleaner spray.
>>
>>
>>
>> ------------------------------------------------------------------------
>> On Monday, November 4, 2019 tigers-request <tigers@autox.team.net
>>
>> Send Tigers mailing list submissions to
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://autox.team.net/mailman/listinfo/tigers
>> or, via email, send a message with subject or body 'help' to
>>
>> You can reach the person managing the list at
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Tigers digest..."
>>
>>
>> Today's Topics:
>>
>> Â 1. Panel Lights (Joe Brown)
>> Â 2. Re: Panel Lights (Ron Fraser)
>> Â 3. Re: Panel Lights (Norman Miller)
>> Â 4. Re: Panel Lights (Tom Witt)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Mon, 4 Nov 2019 21:26:45 -0600
>> From: Joe Brown <jbbrown1980@gmail.com
>> To: Tiger Group <tigers@autox.team.net
>> Subject: [Tigers] Panel Lights
>> Message-ID:
>> Â Â Â
>> <CAKb_wfkndUjiVdZGG3Pem0Q8Xoy9dgOPav_FcGS4KQdEV7t_mQ@mail.gmail.com
>> Content-Type: text/plain; charset="utf-8"
>>
>> I now have everything wired up and installed on my dashboard and
>> I have a
>> couple of questions about the panel lights.
>>
>> 1. Why is the switch 3 position (off-on-on). The panel lights
>> are on in
>> both of the on positions. Why isn't this switch just an off-on
>> switch?
>>
>> 2. The panel lights come on but you can barely see them. What are
>> some
>> good LED replacements?
>>
>> Thanks,
>> Joe
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>>
>> <http://autox.team.net/pipermail/tigers/attachments/20191104/3a766c43/attachment-0001.htm>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Mon, 4 Nov 2019 23:16:07 -0500
>> From: "Ron Fraser" <rfraser@bluefrog.com
>> To: "'Joe Brown'" <jbbrown1980@gmail.com
>> Subject: Re: [Tigers] Panel Lights
>> Message-ID: <000f01d5938f$c0f9f230$42edd690$@bluefrog.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Joe
>>
>>
>>
>> 1 ? I have no idea why the switch is like that ? I leave it in
>> the ON position
>>
>>
>>
>> 2 ? Joe Parlanti, TE/AE president has LED kits ? I installed his
>> panel light kit ? works great, now I can see the gages at night
>>
>>
>> http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm
>>
>>
>>
>>
>>
>> Ron Fraser
>>
>>
>>
>> From: Tigers <tigers-bounces@autox.team.net
>> via Tigers
>> Sent: Monday, November 04, 2019 10:27 PM
>> To: Tiger Group <tigers@autox.team.net
>> Subject: [Tigers] Panel Lights
>>
>>
>>
>> I now have everything wired up and installed on my dashboard and
>> I have a couple of questions about the panel lights.
>>
>>
>>
>> 1. Why is the switch 3 position (off-on-on). The panel lights
>> are on in both of the on positions. Why isn't this switch just
>> an off-on switch?
>>
>>
>>
>> 2. The panel lights come on but you can barely see them. What are
>> some good LED replacements?
>>
>>
>>
>> Thanks,
>>
>> Joe
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>>
>> <http://autox.team.net/pipermail/tigers/attachments/20191104/d9939012/attachment-0001.htm>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Mon, 04 Nov 2019 21:11:26 -0800
>> From: Norman Miller <rootes1@earthlink.net
>> Subject: Re: [Tigers] Panel Lights
>> Message-ID: <E1iRr7q-0009wO-0A@elasmtp-dupuy.atl.sa.earthlink.net
>> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
>>
>> Come on you guys. The two position switch is
>> designed for dim, bright and off. Rootes did
>> change this in later cars - simply on or off.
>>
>>
>>
>> At 08:16 PM 11/4/2019, Ron Fraser via Tigers wrote:
>> >Content-Type: multipart/alternative;
>> > boundary="----=_NextPart_000_0010_01D59365.D82570D0"
>> >Content-Language: en-us
>> >
>> >Joe
>> >? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
>> >1 ? I have no idea why the switch is like that ?
>> >I leave ve it in the ON position
>> >
>> >2 ? Joe Parlanti, TE/AE president has LED kits ?
>> >I installed his panel light kit ? works great, now I can see the
>> gages at night
>>
>> ><http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm>http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm
>> >
>> >
>> >Ron Fraser
>> >
>> >From: Tigers <tigers-bounces@autox.team.net
>> via Tigers
>> >Sent: Monday, November 04, 2019 10:27 PM
>> >To: Tiger Group <tigers@autox.team.net
>> >Subject: [Tigers] Panel Lights
>> >
>> >I now have everything wired up and installed on
>> >my dashboard and I have a couple of questions about the panel
>> lights.
>> >
>> >1. Why is the switch 3 position (off-on-on). The
>> >panel lights are on in both of the on
>> >positions. Why isn't this switch just an off-on switch?
>> >
>> >2. The panel lights come on but you can barely
>> >see them. What are some good LED replacements?
>> >
>> >Thanks,
>> >Joe
>> >_______________________________________________
>> >
>> >
>> >Donate: http://www.team.net/donate.html
>> >Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>> >
>> >Unsubscribe:
>> >http://autox.team.net/mailman/options/tigers/rootes1@earthlink.net
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>>
>> <http://autox.team.net/pipermail/tigers/attachments/20191104/cd0d0e7e/attachment-0001.htm>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Mon, 4 Nov 2019 21:22:27 -0800
>> From: "Tom Witt" <atwittsend@verizon.net
>> Subject: Re: [Tigers] Panel Lights
>> Message-ID: <B606231660BA4278A8C040C1E0D3AFCB@user1PC
>> Content-Type: text/plain; charset="utf-8"
>>
>> ?The two position switch is designed for dim, bright and off.?
>>
>> Yes, but when the King?s English gets translated into American
>> English it becomes, can barely see, can?t see, and the position
>> that doesn?t drain the battery.
>>
>> From: Norman Miller via Tigers
>> Sent: Monday, November 04, 2019 9:11 PM
>> Subject: Re: [Tigers] Panel Lights
>>
>> Come on you guys. The two position switch is designed for dim,
>> bright and off. Rootes did change this in later cars - simply on
>> or off.
>>
>>
>>
>> At 08:16 PM 11/4/2019, Ron Fraser via Tigers wrote:
>>
>> Â Content-Type: multipart/alternative;
>> boundary="----=_NextPart_000_0010_01D59365.D82570D0"
>> Â Content-Language: en-us
>>
>> Â Joe
>> Â ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
>> Â 1 ? I have no idea why the switch is like that ? I leave ve it
>> in the ON position
>>
>> Â 2 ? Joe Parlanti, TE/AE president has LED kits ? I installed
>> his panel light kit ? works great, now I can see the gages at night
>>
>> http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm
>>
>>
>>
>> Â Ron Fraser
>>
>> Â From: Tigers <tigers-bounces@autox.team.net
>> via Tigers
>> Â Sent: Monday, November 04, 2019 10:27 PM
>> Â To: Tiger Group <tigers@autox.team.net
>> Â Subject: [Tigers] Panel Lights
>>
>> Â I now have everything wired up and installed on my dashboard
>> and I have a couple of questions about the panel lights.
>>
>>  1. Why is the switch 3 position (off-on-on). The panel lights
>> are on in both of the on positions. Why isn't this switch just
>> an off-on switch?
>>
>> Â 2. The panel lights come on but you can barely see them. What
>> are some good LED replacements?
>>
>> Â Thanks,
>> Â Joe
>> _______________________________________________
>>
>>
>> Â Donate: http://www.team.net/donate.html
>> Â Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>> Â Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/rootes1@earthlink.net
>>
>>
>>
>> --------------------------------------------------------------------------------
>> _______________________________________________
>>
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net
>>
>>
>>
>>
>> --
>> This email has been checked for viruses by AVG.
>> https://www.avg.com
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>>
>> <http://autox.team.net/pipermail/tigers/attachments/20191104/8f59362b/attachment.htm>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> Tigers mailing list
>> http://autox.team.net/mailman/listinfo/tigers
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>>
>> ------------------------------
>>
>> End of Tigers Digest, Vol 11, Issue 284
>> ***************************************
>>
>> _______________________________________________
>>
>>
>> Donate:http://www.team.net/donate.html
>> Archive:http://www.team.net/pipermail/tigers
>> http://autox.team.net/archive
>>
>>
>> Unsubscribe:http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>>
>>
> _______________________________________________
>
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/tigers
> http://autox.team.net/archive
>
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com
>
>
--------------670E87EB1305627188DAC107
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>In stock configuration (normal bulbs) with clean gauges, I find
the full bright position is the only one to use,</p>
<p>it's actually just about right. I wouldn't bother with a
resistor if you don't have the carbon block.</p>
<p>The only gauge that is waaayyy too dim is the Tach. It's problem
is that the circuit board inside blocks the</p>
<p>bulb light. If you update the electronics (like you should) with
Theo's kit, you can cut or remove the old</p>
<p>circuit board and have a visible tach at night.</p>
<p>Gary</p>
<p><br>
</p>
<div class="moz-cite-prefix">On 11/5/2019 7:17 AM, Joe Brown wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAKb_wfngLUew_gg4-T+hyRhkANVUzTX=Nh_kMmhLN64VM01Fxg@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="auto">I was wondering how you could get two levels ofÂ
brightness out of that switch the way it is wired. IÂ neverÂ
noticed a carbon block on the switch so it must fallen off in
the past. I suppose a resistor could replace it but I have no
idea what value to use or what contacts to put it across. I
will probably just replace the switch with an on-off switch.Â
<div dir="auto"><br>
</div>
<div dir="auto">Thanks, </div>
<div dir="auto">Joe </div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Tue, Nov 5, 2019, 9:07 AM
Gary via Tigers <<a href="mailto:tigers@autox.team.net";
moz-do-not-send="true">tigers@autox.team.net</a>> wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<p>The switch has a block of carbon that clips in. If its
still there, poor contact makes the lights dimmer, if
someone</p>
<p>"put a penny in the fuse holder" it will have two bright
positions. Bright is a british joke though. Dim and
dimmer</p>
<p>and off are the correct functions.</p>
<p>Gary</p>
<p><br>
</p>
<div>On 11/5/2019 6:50 AM, Warren Goodman via Tigers wrote:<br>
</div>
<blockquote type="cite">
<p dir="ltr">My newest old car has the same function. Dim
and not as dim. I have not seen Joe's but I bet he has
softened the color of the LEDs . My aftermarket previous
owner installed LEDs are actually on the verge of being
annoyingly bright, " not Joe's brand." <br>
</p>
<p dir="ltr">BTW the two position switch often has bad
contacts. Some switches will benefit from a electrical
contact cleaner spray. </p>
<br>
<br>
<hr
style="border:0;height:1px;color:#999;background-color:#999;width:100%;margin:0
0 9px 0;padding:0"><span
style="font-size:14px;color:#999999">On Monday, November
4, 2019 tigers-request <<span style="color:#0000a0"><a
href="mailto:tigers@autox.team.net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a></span>>
wrote:</span><br>
<br>
<div dir="ltr">Send Tigers mailing list submissions to<br>
</div>
<div dir="ltr">Â Â Â <a href="mailto:tigers@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">To subscribe or unsubscribe via the World
Wide Web, visit<br>
</div>
<div dir="ltr">Â Â Â <a
href="http://autox.team.net/mailman/listinfo/tigers";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/mailman/listinfo/tigers</a><br>
</div>
<div dir="ltr">or, via email, send a message with subject
or body 'help' to<br>
</div>
<div dir="ltr">Â Â Â <a
href="mailto:tigers-request@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers-request@autox.team.net</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">You can reach the person managing the list
at<br>
</div>
<div dir="ltr">Â Â Â <a
href="mailto:tigers-owner@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers-owner@autox.team.net</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">When replying, please edit your Subject
line so it is more specific<br>
</div>
<div dir="ltr">than "Re: Contents of Tigers digest..."<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Today's Topics:<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Â 1. Panel Lights (Joe Brown)<br>
</div>
<div dir="ltr">Â 2. Re: Panel Lights (Ron Fraser)<br>
</div>
<div dir="ltr">Â 3. Re: Panel Lights (Norman Miller)<br>
</div>
<div dir="ltr">Â 4. Re: Panel Lights (Tom Witt)<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div
dir="ltr">----------------------------------------------------------------------<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Message: 1<br>
</div>
<div dir="ltr">Date: Mon, 4 Nov 2019 21:26:45 -0600<br>
</div>
<div dir="ltr">From: Joe Brown <<a
href="mailto:jbbrown1980@gmail.com"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">jbbrown1980@gmail.com</a>><br>
</div>
<div dir="ltr">To: Tiger Group <<a
href="mailto:tigers@autox.team.net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a>><br>
</div>
<div dir="ltr">Subject: [Tigers] Panel Lights<br>
</div>
<div dir="ltr">Message-ID:<br>
</div>
<div dir="ltr">Â Â Â <<a
href="mailto:CAKb_wfkndUjiVdZGG3Pem0Q8Xoy9dgOPav_FcGS4KQdEV7t_mQ@mail.gmail.com";
target="_blank" rel="noreferrer"
moz-do-not-send="true">CAKb_wfkndUjiVdZGG3Pem0Q8Xoy9dgOPav_FcGS4KQdEV7t_mQ@mail.gmail.com</a>><br>
</div>
<div dir="ltr">Content-Type: text/plain; charset="utf-8"<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">I now have everything wired up and
installed on my dashboard and I have a<br>
</div>
<div dir="ltr">couple of questions about the panel lights.<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">1. Why is the switch 3 position
(off-on-on). The panel lights are on in<br>
</div>
<div dir="ltr">both of the on positions. Why isn't this
switch just an off-on switch?<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">2. The panel lights come on but you can
barely see them. What are some<br>
</div>
<div dir="ltr">good LED replacements?<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Thanks,<br>
</div>
<div dir="ltr">Joe<br>
</div>
<div dir="ltr">-------------- next part --------------<br>
</div>
<div dir="ltr">An HTML attachment was scrubbed...<br>
</div>
<div dir="ltr">URL: <<a
href="http://autox.team.net/pipermail/tigers/attachments/20191104/3a766c43/attachment-0001.htm";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/pipermail/tigers/attachments/20191104/3a766c43/attachment-0001.htm</a>><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">------------------------------<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Message: 2<br>
</div>
<div dir="ltr">Date: Mon, 4 Nov 2019 23:16:07 -0500<br>
</div>
<div dir="ltr">From: "Ron Fraser" <<a
href="mailto:rfraser@bluefrog.com"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">rfraser@bluefrog.com</a>><br>
</div>
<div dir="ltr">To: "'Joe Brown'" <<a
href="mailto:jbbrown1980@gmail.com"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">jbbrown1980@gmail.com</a>><br>
</div>
<div dir="ltr">Cc: <<a
href="mailto:tigers@Autox.Team.Net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">tigers@Autox.Team.Net</a>><br>
</div>
<div dir="ltr">Subject: Re: [Tigers] Panel Lights<br>
</div>
<div dir="ltr">Message-ID: <a
href="mailto:000f01d5938f$c0f9f230$42edd690$@bluefrog.com";
target="_blank" rel="noreferrer"
moz-do-not-send="true"><000f01d5938f$c0f9f230$42edd690$@bluefrog.com></a><br>
</div>
<div dir="ltr">Content-Type: text/plain; charset="utf-8"<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Joe<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Â Â Â Â Â Â Â Â <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">1 ? I have no idea why the switch is like
that ? I leave it in the ON position<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"> <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">2 ? Joe Parlanti, TE/AE president has LED
kits ? I installed his panel light kit ? works great,
now I can see the gages at night<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><a
href="http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"> <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"> <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Ron Fraser<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"> <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">From: Tigers <<a
href="mailto:tigers-bounces@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers-bounces@autox.team.net</a>>
On Behalf Of Joe Brown via Tigers<br>
</div>
<div dir="ltr">Sent: Monday, November 04, 2019 10:27 PM<br>
</div>
<div dir="ltr">To: Tiger Group <<a
href="mailto:tigers@autox.team.net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a>><br>
</div>
<div dir="ltr">Subject: [Tigers] Panel Lights<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"> <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">I now have everything wired up and
installed on my dashboard and I have a couple of
questions about the panel lights.<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"> <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">1. Why is the switch 3 position
(off-on-on). The panel lights are on in both of the on
positions. Why isn't this switch just an off-on
switch? <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"> <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">2. The panel lights come on but you can
barely see them. What are some good LED replacements?<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"> <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Thanks,<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Joe<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">-------------- next part --------------<br>
</div>
<div dir="ltr">An HTML attachment was scrubbed...<br>
</div>
<div dir="ltr">URL: <<a
href="http://autox.team.net/pipermail/tigers/attachments/20191104/d9939012/attachment-0001.htm";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/pipermail/tigers/attachments/20191104/d9939012/attachment-0001.htm</a>><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">------------------------------<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Message: 3<br>
</div>
<div dir="ltr">Date: Mon, 04 Nov 2019 21:11:26 -0800<br>
</div>
<div dir="ltr">From: Norman Miller <<a
href="mailto:rootes1@earthlink.net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">rootes1@earthlink.net</a>><br>
</div>
<div dir="ltr">To: <a href="mailto:tigers@Autox.Team.Net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers@Autox.Team.Net</a><br>
</div>
<div dir="ltr">Subject: Re: [Tigers] Panel Lights<br>
</div>
<div dir="ltr">Message-ID: <<a
href="mailto:E1iRr7q-0009wO-0A@elasmtp-dupuy.atl.sa.earthlink.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">E1iRr7q-0009wO-0A@elasmtp-dupuy.atl.sa.earthlink.net</a>><br>
</div>
<div dir="ltr">Content-Type: text/plain;
charset="iso-8859-1"; Format="flowed"<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Come on you guys. The two position switch
is <br>
</div>
<div dir="ltr">designed for dim, bright and off. Rootes
did <br>
</div>
<div dir="ltr">change this in later cars - simply on or
off.<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">At 08:16 PM 11/4/2019, Ron Fraser via
Tigers wrote:<br>
</div>
<div dir="ltr">>Content-Type: multipart/alternative;<br>
</div>
<div dir="ltr">>Â Â Â Â
boundary="----=_NextPart_000_0010_01D59365.D82570D0"<br>
</div>
<div dir="ltr">>Content-Language: en-us<br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>Joe<br>
</div>
<div dir="ltr">>? ? ? ? ? ? ? ? ? ? ? ? ? ? ?<br>
</div>
<div dir="ltr">>1 ? I have no idea why the switch is
like that ? <br>
</div>
<div dir="ltr">>I leave ve it in the ON position<br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>2 ? Joe Parlanti, TE/AE president has
LED kits ? <br>
</div>
<div dir="ltr">>I installed his panel light kit ? works
great, now I can see the gages at night<br>
</div>
<div dir="ltr">><<a
href="http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm</a>><a
href="http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm</a><br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>Ron Fraser<br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>From: Tigers <<a
href="mailto:tigers-bounces@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers-bounces@autox.team.net</a>>
On Behalf Of Joe Brown via Tigers<br>
</div>
<div dir="ltr">>Sent: Monday, November 04, 2019 10:27
PM<br>
</div>
<div dir="ltr">>To: Tiger Group <<a
href="mailto:tigers@autox.team.net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a>><br>
</div>
<div dir="ltr">>Subject: [Tigers] Panel Lights<br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>I now have everything wired up and
installed on <br>
</div>
<div dir="ltr">>my dashboard and I have a couple of
questions about the panel lights.<br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>1. Why is the switch 3 position
(off-on-on). The <br>
</div>
<div dir="ltr">>panel lights are on in both of the on
<br>
</div>
<div dir="ltr">>positions. Why isn't this switch just
an off-on switch?<br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>2. The panel lights come on but you can
barely <br>
</div>
<div dir="ltr">>see them. What are some good LED
replacements?<br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>Thanks,<br>
</div>
<div dir="ltr">>Joe<br>
</div>
<div
dir="ltr">>_______________________________________________<br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">><a href="mailto:tigers@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a><br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>Donate: <a
href="http://www.team.net/donate.html"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">http://www.team.net/donate.html</a><br>
</div>
<div dir="ltr">>Archive: <a
href="http://www.team.net/pipermail/tigers";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://www.team.net/pipermail/tigers
</a><a href="http://autox.team.net/archive";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/archive</a><br>
</div>
<div dir="ltr">><br>
</div>
<div dir="ltr">>Unsubscribe: <br>
</div>
<div dir="ltr">><a
href="http://autox.team.net/mailman/options/tigers/rootes1@earthlink.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/mailman/options/tigers/rootes1@earthlink.net</a><br>
</div>
<div dir="ltr">-------------- next part --------------<br>
</div>
<div dir="ltr">An HTML attachment was scrubbed...<br>
</div>
<div dir="ltr">URL: <<a
href="http://autox.team.net/pipermail/tigers/attachments/20191104/cd0d0e7e/attachment-0001.htm";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/pipermail/tigers/attachments/20191104/cd0d0e7e/attachment-0001.htm</a>><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">------------------------------<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Message: 4<br>
</div>
<div dir="ltr">Date: Mon, 4 Nov 2019 21:22:27 -0800<br>
</div>
<div dir="ltr">From: "Tom Witt" <<a
href="mailto:atwittsend@verizon.net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">atwittsend@verizon.net</a>><br>
</div>
<div dir="ltr">To: <<a
href="mailto:tigers@Autox.Team.Net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">tigers@Autox.Team.Net</a>><br>
</div>
<div dir="ltr">Subject: Re: [Tigers] Panel Lights<br>
</div>
<div dir="ltr">Message-ID: <<a
href="mailto:B606231660BA4278A8C040C1E0D3AFCB@user1PC";
target="_blank" rel="noreferrer"
moz-do-not-send="true">B606231660BA4278A8C040C1E0D3AFCB@user1PC</a>><br>
</div>
<div dir="ltr">Content-Type: text/plain; charset="utf-8"<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">?The two position switch is designed for
dim, bright and off.? <br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Yes, but when the King?s English gets
translated into American English it becomes, can barely
see, can?t see, and the position that doesn?t drain the
battery.<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">From: Norman Miller via Tigers <br>
</div>
<div dir="ltr">Sent: Monday, November 04, 2019 9:11 PM<br>
</div>
<div dir="ltr">To: <a href="mailto:tigers@Autox.Team.Net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers@Autox.Team.Net</a> <br>
</div>
<div dir="ltr">Subject: Re: [Tigers] Panel Lights<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Come on you guys. The two position switch
is designed for dim, bright and off. Rootes did change
this in later cars - simply on or off.<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">At 08:16 PM 11/4/2019, Ron Fraser via
Tigers wrote:<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Â Content-Type: multipart/alternative;<br>
</div>
<div dir="ltr">Â Â Â Â Â
boundary="----=_NextPart_000_0010_01D59365.D82570D0"<br>
</div>
<div dir="ltr">Â Content-Language: en-us<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Â Joe<br>
</div>
<div dir="ltr"> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? <br>
</div>
<div dir="ltr">Â 1 ? I have no idea why the switch is like
that ? I leave ve it in the ON position<br>
</div>
<div dir="ltr">Â <br>
</div>
<div dir="ltr">Â 2 ? Joe Parlanti, TE/AE president has LED
kits ? I installed his panel light kit ? works great,
now I can see the gages at night<br>
</div>
<div dir="ltr">Â <a
href="http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://www.velocesolutionsllc.com/Sunbeam-Alpine-and-Tiger-Exterior-Lighting-Kit-Alpine-Tiger-Exterior.htm
</a><br>
</div>
<div dir="ltr">Â <br>
</div>
<div dir="ltr">Â <br>
</div>
<div dir="ltr">Â Ron Fraser<br>
</div>
<div dir="ltr">Â <br>
</div>
<div dir="ltr">Â From: Tigers <<a
href="mailto:tigers-bounces@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers-bounces@autox.team.net</a>>
On Behalf Of Joe Brown via Tigers<br>
</div>
<div dir="ltr">Â Sent: Monday, November 04, 2019 10:27 PM<br>
</div>
<div dir="ltr">Â To: Tiger Group <<a
href="mailto:tigers@autox.team.net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a>><br>
</div>
<div dir="ltr">Â Subject: [Tigers] Panel Lights<br>
</div>
<div dir="ltr">Â <br>
</div>
<div dir="ltr">Â I now have everything wired up and
installed on my dashboard and I have a couple of
questions about the panel lights.<br>
</div>
<div dir="ltr">Â <br>
</div>
<div dir="ltr">Â 1. Why is the switch 3 position
(off-on-on). The panel lights are on in both of the on
positions. Why isn't this switch just an off-on
switch? <br>
</div>
<div dir="ltr">Â <br>
</div>
<div dir="ltr">Â 2. The panel lights come on but you can
barely see them. What are some good LED replacements?<br>
</div>
<div dir="ltr">Â <br>
</div>
<div dir="ltr">Â Thanks,<br>
</div>
<div dir="ltr">Â Joe<br>
</div>
<div dir="ltr">Â
_______________________________________________<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Â <a href="mailto:tigers@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Â Donate: <a
href="http://www.team.net/donate.html"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">http://www.team.net/donate.html</a><br>
</div>
<div dir="ltr">Â Archive: <a
href="http://www.team.net/pipermail/tigers";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://www.team.net/pipermail/tigers
</a><a href="http://autox.team.net/archive";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/archive</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Â Unsubscribe: <a
href="http://autox.team.net/mailman/options/tigers/rootes1@earthlink.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/mailman/options/tigers/rootes1@earthlink.net
</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div
dir="ltr">--------------------------------------------------------------------------------<br>
</div>
<div dir="ltr">_______________________________________________<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><a href="mailto:tigers@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Donate: <a
href="http://www.team.net/donate.html"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">http://www.team.net/donate.html</a><br>
</div>
<div dir="ltr">Archive: <a
href="http://www.team.net/pipermail/tigers";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://www.team.net/pipermail/tigers
</a><a href="http://autox.team.net/archive";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/archive</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Unsubscribe: <a
href="http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/mailman/options/tigers/atwittsend@verizon.net</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">-- <br>
</div>
<div dir="ltr">This email has been checked for viruses by
AVG.<br>
</div>
<div dir="ltr"><a href="https://www.avg.com";
target="_blank" rel="noreferrer"
moz-do-not-send="true">https://www.avg.com</a><br>
</div>
<div dir="ltr">-------------- next part --------------<br>
</div>
<div dir="ltr">An HTML attachment was scrubbed...<br>
</div>
<div dir="ltr">URL: <<a
href="http://autox.team.net/pipermail/tigers/attachments/20191104/8f59362b/attachment.htm";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/pipermail/tigers/attachments/20191104/8f59362b/attachment.htm</a>><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">------------------------------<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Subject: Digest Footer<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">_______________________________________________<br>
</div>
<div dir="ltr">Tigers mailing list<br>
</div>
<div dir="ltr"><a href="mailto:Tigers@autox.team.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">Tigers@autox.team.net</a><br>
</div>
<div dir="ltr"><a
href="http://autox.team.net/mailman/listinfo/tigers";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/mailman/listinfo/tigers</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">Donate: <a
href="http://www.team.net/donate.html"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">http://www.team.net/donate.html</a><br>
</div>
<div dir="ltr">Archive: <a
href="http://www.team.net/pipermail/tigers";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://www.team.net/pipermail/tigers
</a><a href="http://autox.team.net/archive";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/archive</a><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">------------------------------<br>
</div>
<div dir="ltr"><br>
</div>
<div dir="ltr">End of Tigers Digest, Vol 11, Issue 284<br>
</div>
<div dir="ltr">***************************************<br>
</div>
<br>
<fieldset></fieldset>
<pre>_______________________________________________
<a href="mailto:tigers@autox.team.net"; target="_blank" rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a>
Archive: <a href="http://www.team.net/pipermail/tigers"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">http://www.team.net/pipermail/tigers</a> <a
href="http://autox.team.net/archive"; target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/archive</a>
Unsubscribe: <a
href="http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net";
target="_blank" rel="noreferrer"
moz-do-not-send="true">http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net</a>
</pre>
</blockquote>
</div>
_______________________________________________<br>
<br>
<a href="mailto:tigers@autox.team.net"; target="_blank"
rel="noreferrer"
moz-do-not-send="true">tigers@autox.team.net</a><br>
<br>
Donate: <a href="http://www.team.net/donate.html";
rel="noreferrer noreferrer" target="_blank"
moz-do-not-send="true">http://www.team.net/donate.html</a><br>
Archive: <a href="http://www.team.net/pipermail/tigers";
rel="noreferrer noreferrer" target="_blank"
moz-do-not-send="true">http://www.team.net/pipermail/tigers</a>
<a href="http://autox.team.net/archive"; rel="noreferrer
noreferrer" target="_blank"
moz-do-not-send="true">http://autox.team.net/archive</a><br>
<br>
Unsubscribe: <a
href="http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com";
rel="noreferrer noreferrer" target="_blank"
moz-do-not-send="true">http://autox.team.net/mailman/options/tigers/jbbrown1980@gmail.com</a><br>
<br>
<br>
</blockquote>
</div>
</blockquote>
</body>
</html>
--------------670E87EB1305627188DAC107--
--===============5626859399477520656==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/pipermail/tigers http://autox.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
--===============5626859399477520656==--
|