Google is your friend...
F1AZ6890B
Apparently this part is about $8.66 at your local Ford parts counter.
Theo
> -----Original Message-----
> From: tigers-bounces@autox.team.net [mailto:tigers-
> bounces@autox.team.net] On Behalf Of Joel Martin
> Sent: April 17, 2013 1:07 PM
> To: Tiger List Serve
> Subject: [Tigers] Thermostat Housing and Right Angle oil filter adapter
>
> All
>
> Does anyone know a part number of correct thermostat housing? Does it
> have just one nipple for a 66 MK 1A 289 motor? I will be installing
> the heater core.
>
> Also, I purchased the FMS-M-6880-A50 90 DEGREE OIL FILTER
> ADAPTOR. This
> requires a nipple adapter that goes into the block and then into the
> bolt of the adapter. In checking with Summit, they said it was 3/4"
> x16 on both sides. Apparently not, anyone know the correct nipple to
> purchase with part number aaa x size on the block side and 3/4 x 16 on
> the adapter side.
>
> Thanks
> Joel Martin
> _______________________________________________
>
> tigers@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/theo.smit@dynastream.com
>
>
________________________________
CONFIDENTIALITY NOTICE: This email and any attachments are for the sole use of
the intended recipient(s) and contain information that may be confidential
and/or legally privileged. If you have received this email in error, please
notify the sender by reply email and delete the message. Any disclosure,
copying, distribution or use of this communication (including attachments) by
someone other than the intended recipient is prohibited. Thank you.
_______________________________________________
tigers@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/tigers/mharc@autox.team.net
|