Ron,
Thanks. That's one detail that I can remove from the list :)
Allan Ballard
Mk1a Tiger
Sent from my iPhone
On Jun 7, 2012, at 4:30 PM, " Ron Fraser" <rfraser@bluefrog.com> wrote:
> Allan
> The small piece under the steering column is covered with small pebble
grain vinyl - Black.
>
> Ron Fraser
> -----Original Message-----
> From: Allan Ballard [mailto:aballard@ix.netcom.com]
> Sent: Thursday, June 07, 2012 3:38 PM
> To: Gary Winblad
> Cc: awtiger@cox.net; rfraser@bluefrog.com; tigers@autox.team.net; Allan
Ballard
> Subject: Re: [Tigers] Re-veneering the dash
>
> The mystery deepens :)
>
> I stopped by the re-finisher to see the walnut veneer that he had selected
to match
> what is on the Tiger's dash, from his old stash.
>
> It isn't burled :)
>
> I've not looked closely at many stock Tiger dash's but mine is about 99%
burl free.
>
> He further stated that the grain should be vertical to match, not left to
right.
>
> He mentioned the color shade but I have forgotten the name of it. In his
view it was a relatively
> darkish shade of brown.
>
> Then another question arose.
>
> The small piece that joins the dash beneath the steering column - is it
supposed to match the veneer?
>
> Rgds,
>
> Allan Ballard
> Mk1a Tiger
>
>
>
>
>
>
>
>
>
> On 6/7/12 3:17 PM, Gary Winblad wrote:
>>
>> Well, there is "right" and there is "Prestige". There is no way any Tiger
came with a dash
>> with that perfect mirror finish!
>> I think it should be burled but not that burled... it was a cheaper cut so
to speak, probably
>> like your store was telling you. It has burls (and every car is different)
but not that many
>> like what you buy now as burled. But NOT just plain Walnut!!
>> And it should be dark like the protected bottom edge. Dark walnut stain is
what I think
>> I used. The dash had a clear plastic type finish. The steering wheel had
an almost
>> opaque brown finish, the wood grain hardly shows, it looked almost like
brown plastic.
>>
>> Gary
>>
>> ----- Original Message -----
>> From: awtiger@cox.net
>> To: rfraser@bluefrog.com, aballard@ix.netcom.com, tigers@autox.team.net
>> Sent: Thu, 07 Jun 2012 15:47:47 -0000 (UTC)
>> Subject: Re: [Tigers] Re-veneering the dash
>>
>> Allan:
>>
>> If you are looking for a quality reproduction of an original Sunbeam dash,
why not just buy one from Prestige Autowood? I realize that they are pricey,
but they are very well done and look correct in the car. All you'll have to
do is install it. I've got one in my car and it still looks new after 25
years. Evidently, redoing the original dashes must be difficult because you
don't see too many of them done right; one can almost invariably tell that
they were "homemade." From my way of thinking, if I'm going to have to be
staring at that dash for years to come, I would want it right.
>>
>> http://www.prestigeautowood.com/
>>
>> My .02 worth,
>> Andy Walker
>> Edmond, OK
>> B382001600LRXFE
>> TAC #740
>> _______________________________________________
>>
>> tigers@autox.team.net
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe:
http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>>
>>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2425/5044 - Release Date: 06/04/12
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/tigers-archive@autox.team.net
|