The Mark II owners manual has an illustration of the cooler in the jacking
instructions
page.
If you find stock cooler brackets on your 1A, without a cooler, it might be
because the 1A uses the same body as the Alpine V, which has a cooler. Also,
the part number for the lower valance(Rootes calls it an apron) for the Alpine
I through IV was later changed to the number for the Alpine V, which presumably
has the brackets for a cooler. Also, when my lower valance for my 1A was
replaced
with a new part from the UK 15 years ago, the new one had brackets.
For those folks with the later parts catalogue featuring the Mark II, you'll
find illustrations of both the Mark II cooler parts and the Alpine V cooler
in the engine section.
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|