Listers -
I'm in the process of replumbing the fuel line between the fuel tank
crossover tube and the fuel pump. I have an aftermarket fuel pump that's
mounted on the trunk bulkhead in the spare tire well. The current
configuration uses about 18 inches of the original fuel line to connect to
the gas tank crossover tube. The line is damaged and I'd like to replace
it. Will a standard NPT or AN fitting thread onto the crossover tube
nipple? Any experience out there using anodized fittings to connect to the
crossover tube?
Thanks as always,
Graham Harlowe
B382001466
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|