Note that that 'kit' contains a 'half v' profile chrome bezel which is most
common in 'Smiths' labeled gauges for Austin Healeys, etc. ... The Jaeger
gauges in Sunbeams all use the 'full v' profile...
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Will Seay
Sent: Saturday, April 02, 2011 7:20 PM
To: Rollright@aol.com; tigers@Autox.Team.Net
Subject: Re: [Tigers] Tach / Speedo parts
Jim,
MJC Products currently has a 4" Chrome Bezel kit on ebay at a buy-it-now
price
of $13.61 + S/H. It's ebay# 310181050128. The kit contains new chrome
bezel,
new glass face, the soft rubber 'O' ring that you are looking for, the other
internal 'O' ring, and the square-sectioned 'O' ring that goes between the
bezel
and the dash. You can probably contact the seller and get him to sell you
less
than a complete kit, but at only $13.61, why not go for big casino.
-Will 382001570
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On
Behalf Of Rollright@aol.com
Sent: Saturday, April 02, 2011 1:06 PM
To: tigers@Autox.Team.Net
Subject: [Tigers] Tach / Speedo parts
Hello,
I'm nearly finished the Auto Meter tach project
1. take it apart
2. hog out the I.D. to accommodate the Sunbeam inner bezel
3. cut down the tach can rim diameter a bit
4. cut in the tabs into the tach can rim
5. paint the inside section blue
Here is where I got stuck.
You know the rubber ring that goes between the glass and the lower black
inner bezel? I don't have one.
Anybody got any idea on where to get them?
Help!
Jim Armstrong
Mk 1A 382002083
LRXFE
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|