Rocket Seals
1297 S. Lipan
Denver, Co. 777-7024
303-777-7024
Theye had all the different gauge sizes and I imangine any size you need.
TtT
--- On Sat, 4/2/11, Rollright@aol.com <Rollright@aol.com> wrote:
> From: Rollright@aol.com <Rollright@aol.com>
> Subject: [Tigers] Tach / Speedo parts
> To: tigers@Autox.Team.Net
> Date: Saturday, April 2, 2011, 12:06 PM
> Hello,
>
> I'm nearly finished the Auto Meter tach project
>
> 1. take it apart
> 2. hog out the I.D. to accommodate the Sunbeam inner bezel
> 3. cut down the tach can rim diameter a bit
> 4. cut in the tabs into the tach can rim
> 5. paint the inside section blue
>
> Here is where I got stuck.
>
> You know the rubber ring that goes between the glass and
> the lower black
> inner bezel? I don't have one.
>
> Anybody got any idea on where to get them?
>
> Help!
>
> Jim Armstrong
> Mk 1A 382002083
> LRXFE
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/achd73@yahoo.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|