< Yes, I'll have to get it done.
< I think it's a very slow release thing. Don't think I'm deluged with
< crud. The filter didn't have much.
< The only line I blew out was the output line, from the carb back.
Now is the time.. The bits of crud in the filter are a side show.
The real problem causing you to stop are much larger flakes completley
blocking the tank exit. You can blow them back into the tank but it is
very short lived..
I couldn't find any chemical I would be willing to put in the tank
that would attack the chips. MEK didn't touch it... Roots used a good
coating.. But it's bond to the metal is slowly failing..
I finally used quit a bit of mechanical abrasion inside the tank
to get most out..
Good luck
Steve F
*******************************************************************************
Steve Finberg W1GSL w1gsl@mit.edu
PO Box 397082 MIT Br Cambridge MA 02139-7082 617 258 3754
*******************************************************************************
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|