The nylocs should not beused as heat and oil cause them to back off.
Only the swedged steel friction nuts should be used on Rockers. I
realize some have used the nylocs but my experience is tha they are
crap. Posi locks have a set screw that guarentees no backing off after
tightened. LOOK ON Tigersunited.com for the lunatis stroker build up to
see what posi locks look like in the cylinder head section.
Best Regards,
Tim Ronak
Services Consultant
Akzo Nobel Coatings, Inc.
23961 Via El Rocio
Mission Viejo, CA 92691
PH: 949-305-5393
Cell: 949-289-3357
FX: 425-955-6268
Email: timothy.ronak@crna.akzonobel.com
<mailto:timothy.ronak@crna.akzonobel.com>
Personal Email: timronak@cox.net <mailto:timronak@cox.net>
If you received this message in error please inform the sender and
delete the message.
________________________________
From: Tony Somebody [mailto:achd73@yahoo.com]
Sent: Friday, April 24, 2009 9:46 AM
To: Ronak, TP (Timothy)
Subject: Re: [Tigers] Valve cover clearance
Tim- I use bushing nuts (nyloc) on many applications- especially my
Hds. Im curious what the posi lock bolts are and if I need them, well,
Im sure there are places I need them but since Im not sure what they are
or look like. cn you expand my knowledge/
thanks, Tony
--- On Fri, 4/24/09, Ronak, TP (Timothy) <Timothy.Ronak@akzonobel.com>
wrote:
From: Ronak, TP (Timothy) <Timothy.Ronak@akzonobel.com>
Subject: [Tigers] Valve cover clearance
To: Theo.Smit@dynastream.com
Cc: "Tiger News Group List" <tigers@autox.team.net>
Date: Friday, April 24, 2009, 10:39 AM
Theo,
With the Twisted wedge heads and the raised rail I was able to
still run the
baffles but had to modify them for the posi lock bolts. It was
easy to do but
I do not know how tough that would be with the stock valvecover
rail height. I
do know they make some thicker heavy rubber gaskets with a steel
shim that may
be a bolt in correction with no grinding. As I recall the gasket
provided a <
inch height.
Best Regards,
Tim Ronak
Services Consultant
Akzo Nobel Coatings, Inc.
23961 Via El Rocio
Mission Viejo, CA 92691
PH: 949-305-5393
Cell: 949-289-3357
FX: 425-955-6268
Email: timothy.ronak@crna.akzonobel.com
<http://us.mc01g.mail.yahoo.com/mc/compose?to=timothy.ronak@crna.akzonob
el.com>
<mailto:timothy.ronak@crna.akzonobel.com
<http://us.mc01g.mail.yahoo.com/mc/compose?to=timothy.ronak@crna.akzonob
el.com> >
Personal Email: timronak@cox.net
<http://us.mc01g.mail.yahoo.com/mc/compose?to=timronak@cox.net>
<mailto:timronak@cox.net
<http://us.mc01g.mail.yahoo.com/mc/compose?to=timronak@cox.net> >
If you received this message in error please inform the sender
and delete the
message.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
<http://us.mc01g.mail.yahoo.com/mc/compose?to=Tigers@autox.team.net>
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|