Theo,
With the Twisted wedge heads and the raised rail I was able to still run the
baffles but had to modify them for the posi lock bolts. It was easy to do but
I do not know how tough that would be with the stock valvecover rail height. I
do know they make some thicker heavy rubber gaskets with a steel shim that may
be a bolt in correction with no grinding. As I recall the gasket provided a <
inch height.
Best Regards,
Tim Ronak
Services Consultant
Akzo Nobel Coatings, Inc.
23961 Via El Rocio
Mission Viejo, CA 92691
PH: 949-305-5393
Cell: 949-289-3357
FX: 425-955-6268
Email: timothy.ronak@crna.akzonobel.com
<mailto:timothy.ronak@crna.akzonobel.com>
Personal Email: timronak@cox.net <mailto:timronak@cox.net>
If you received this message in error please inform the sender and delete the
message.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|