tigers
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Tigers] Bushing for the pulley and fan for the Edelbrock

from [Ronak, TP \(Timothy\)] [Permanent Link][Original]
To: "Patrick" <jpkkmk@aol.com>, "Sandy Ganz" <sganz@pacbell.net>,
Subject: Re: [Tigers] Bushing for the pulley and fan for the Edelbrock
From: "Ronak, TP \(Timothy\)" <Timothy.Ronak@crna.akzonobel.com>
Date: Sat, 22 Mar 2008 11:38:12 -0400 
Patrick,
I am looking to upgrade the cooling system and have chosen the edelbrock
pump ... not sure if it will be an improvement but it certainly seems to
be a more robust unit than the stock one.

Best Regards,

Tim Ronak
Services Consultant

Akzo Nobel Coatings
23961 Via El Rocio
Mission Viejo, CA 92691

Bus: 949-305-5393
Fax: 425-955-6268
Cell: 949-289-3357
email: timothy.ronak@crna.akzonobel.com
Personal email: timronak@cox.net
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Tigers] Subaru Master Cyl. - Do the math, FHSLOTH13
Next by Date:  Re: [Tigers] Subaru Master Cyl. - Do the math, garywinblad
Previous by Thread:  Re: [Tigers] Bushing for the pulley and fan for the Edelbrock, Patrick
Next by Thread:  [Tigers] Pusher fan, CoolVT
Indexes:  [Date] [Thread] [Top] [All Lists]