anyone got a part number for this or a place to get one online? its
on my list of things to get too.
also, is anyone running this with rear disc brakes and no booster? is
there enough travel?
On Fri, Mar 21, 2008 at 10:06 PM, Joe Parlanti <parlanti@comcast.net> wrote:
> Stu,
>
> This is the same master cylinder that I'm using and it works very well.
> I don't run a booster and pedal travel and effort are fine. If I recall
> the only modification that I had to do was to enlarge the large hole in
> the aluminum spacer slightly.
>
> Hope this helps,
>
> Joe Parlanti
> B382000026
>
>
> -----Original Message-----
> From: tigers-bounces+parlanti=comcast.net@autox.team.net
> [mailto:tigers-bounces+parlanti=comcast.net@autox.team.net] On Behalf Of
> Brent Edinger
> Sent: Friday, March 21, 2008 3:49 PM
> To: tigers@autox.team.net
> Subject: [Tigers] Subaru Master Cyl.
>
> Stu, here as the number for the Nissan dual master
> http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=470&LineCode
> =UP&P
> artNumber=39279&Description=Brake+Master+Cylinder+-+New
> I bought one on Ebay for $50. The stock Tiger master is 7/8 bore, this
> one is
> 13/16 which
> should reduce pedal effort but increase travel somewhat. I ran a 13/16
> on my
> race car and
> it worked good, but during racing you utilize the adrenaline brake
> booster.
> Haven't installed it yet on the Tiger.
>
> Brent
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as owain.lloyd@gmail.com
>
> Tigers@autox.team.net
> http://autox.team.net/mailman/listinfo/tigers
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
http://www.team.net/archive
|