I used Eastwood's on my manifolds in 1992. Worked GREAT. There is a little
rust starting now but
boy did they look good for several years. I had them sandblasted at the local
headstone maker before
painting. When you first fire up the new motor they will fume off for a while,
don't start it in the garage!
Gary
-------------- Original message ----------------------
From: Rollright@aol.com
> Hello again,
>
> OK. I'm working away on different aspects of the rebuild and all.
>
> I've glass bead blasted the original exhaust manifolds.
>
> Has anybody had good luck with the exhaust manifold coatings they sell in
> Eastwood? Just want to prevent rust and keep things looking nice. They
>advertise
> that their coatings are good to 1200 F but a very knowledgeable friend said
> that wasn't nearly good enough. Much higher temps he says are seen in IC
> engine exhausts.
>
> Anybody?
>
> Jim Armstrong
> MK 1A 382002083
> Rollright@aol.com
_______________________________________________
Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers
|