Like this one?
http://carshop.carshopinc.com/product_info.php/products_id/59231/CSELP
Best regards,
Theo
----- Original Message -----
From: "Tony Someone" <tonythetiger@onecliq.net>
To: "drmayf" <drmayf@mayfco.com>; "Tigers" <tigers@autox.team.net>
Sent: Thursday, October 06, 2005 1:08 AM
Subject: Re: Engine removal...aid
<snip>
> I wanted to try to describe an engine removing device that is easily made
if
> you have access to a welder and some toe plate , 1/4 inch plate and a
> shackle. I copied mine from a factory orginal. The plate is made to cover
> the intake with carb. removed and has holes drilled so it bolts right to
the
> top of the intake. The one I duplicated had several holes and was made to
<snip>
|