Well, you're not really stuck with the orientation of adapters like the
Trans-Dapt.
The filter is 16 threads per inch.
If you need another 1/4 turn, you just have to machine .015 off of the
adapter. : )
I have the Canton adapter.
It's very nice, but I don't think it will work with headers except the
Cannon type.
Bruce
> ----- Original Message -----
> From: "Theo Smit" <theo.smit@dynastream.com>
> To: <tigers@autox.team.net>
> Sent: Monday, May 16, 2005 1:25 PM
> Subject: RE: stubbie filters/remote syestem
>
>
> > Canton <http://www.cantonracingproducts.com/adapters/remote_filter.html>
> > has remote oil filter adapters, similar to Dale A's. Most of the other
> > remote oil filter adapters (like the Trans-Dapt design) re spin-on
designs
> > where you're stuck with whatever orientation the thing ends up in, and
> > torqueing them up too much causes them to break at an inopportune time
;)
> .
> >
> > Oil cooler/filter hoses should be a minimum of -10 size, or 1/2" ID.
> Beware
> > of hydraulic hose - it's got superlative strength, but usually the ID is
> too
> > small for engine oil flow needs.
> >
> > Theo
|