Canton <http://www.cantonracingproducts.com/adapters/remote_filter.html>
has remote oil filter adapters, similar to Dale A's. Most of the other
remote oil filter adapters (like the Trans-Dapt design) re spin-on designs
where you're stuck with whatever orientation the thing ends up in, and
torqueing them up too much causes them to break at an inopportune time ;) .
Oil cooler/filter hoses should be a minimum of -10 size, or 1/2" ID. Beware
of hydraulic hose - it's got superlative strength, but usually the ID is too
small for engine oil flow needs.
Theo
|