Re: # 8 sparkplug

[Steve Sage <fastsage@cox.net>]

I've always been able to eventually get to #8 (either through the trans tunnel 
plug or by jamming my hand under the 
master cylinders and getting a socket on it). A bigger problem is 
getting the plug wire on and off of the plug. There is no way (or is 
there?) to get your hand directly to that #@##^^!! #8 plug and press the 
plug wire onto it after you do finally get it re-installed. The same 
goes for getting the plug wire off when you go to take the plug out.

One solution I can think of would be to modify the trans tunnel and put 
a small "door" over #8 that would be big enough to just put your hand 
right on the plug. Actually, that would make getting to #7 a bit easier too.

Steve Sage