Frank, Dave's tip is a time saver. And, use Steve L's adjustment
procedure, and you will not have to worry about it again.
Another tip is, after you align the hood, drill a hole in the hinge
through the hood. The next time you remove the hood, all you have to do
is put a drill bit into the previously drilled hole, and your hood is
aligned.
I have two hood, and change out once a year, and this saves me lots of
alignment time.
Larry
DJoh797014@aol.com wrote:
>Frank
>
>Before you put you bonnet back on, remove the safety catch
>and rig something to pull the latch open otherwise you risk
>joining the club of those who have had to remove their bonnet
>the hard way. I believe that TigersUnited has the tip tip on
>how to properly align the bonnet. Once done, put the safety
>catch back on.
>
>Dave
|