When reinstalling my oil guage I found 3 disconnected wires. Again I ask
the lists
help to get my car back on the road..... Just behind the dash laying on the
steering column is the short wiring loom from the turn signal switch. I have 2
wires hanging loose and I need to find where they are supposed to connect.
One is a brown wire
with a U-shaped clip on the end, the type that is slipped under a nut and
tightened down. The other is a blue wire with a bullet tip designed to plug
into
a connector.
Also hanging in that area is a purple wire (from the main loom) with a snap
connector on it but not connected to anything. Does the blue wire from the
turn-signal plug into that purple wire connector. And where does that brown
wire go?
I looked at my old "Sunbeam 260" shop manual but couldn't find the answer.
As
always any help appreciated..........
John Mears
B9471072
|