My inertia switch has been in place for over two years and no problems
yet. And I've gone over some pretty big bumps, not to mention having
very stiff suspension.
Roland
On Mon, 8 Dec 2003 09:01:50 -0700 Theo Smit <theo.smit@dynastream.com>
writes:
> The inertia switch can be done using an accelerometer sensor or by a
> pendulum type switch but you're going to be pretty annoyed when you
> hit
> a sharp bump in the road and it exceeds the threshold you've set.
> It
> would be fairly straightforward to set up a relay type system that
> automatically powers on when you turn the ignition on, but will
> then
> kill the pump on a subsequent loss of oil pressure.
>
> Theo
|