Wow! Nifty setup Dan--elegant, too. My compliments.
And thanks to Steve for posting it to us.
Best Regards
David Sosna
Steve Laifman wrote:
> Tigers and 'Pines,
>
> One of the most often read complaints about our cars is the difficulty
> of removing rear hubs and axles, especially with the Alpine wire wheels
> hub, and the resistance to hub movement with both cars.
>
> We are very fortunate to be able to present Dan Walters' elegant
> solution. A tool designed for making this job, much easier, while not
> resorting to techniques that can damage axle threads. It is also
> designed to clear the Alpine wire wheel hub, as well as the initial
> steps with LAT wheel cast hub centers in place.
>
> It is posted in our "Technical Tips" section in "Restoration Tips" link.
> The latest articles are always on the end of the list.
>
> http://www.TigersUnited.com/tech_tips/tips_rest.asp
>
> Thank you Dan.
>
> Steve
|