Tigers and 'Pines,
One of the most often read complaints about our cars is the difficulty
of removing rear hubs and axles, especially with the Alpine wire wheels
hub, and the resistance to hub movement with both cars.
We are very fortunate to be able to present Dan Walters' elegant
solution. A tool designed for making this job, much easier, while not
resorting to techniques that can damage axle threads. It is also
designed to clear the Alpine wire wheel hub, as well as the initial
steps with LAT wheel cast hub centers in place.
It is posted in our "Technical Tips" section in "Restoration Tips" link.
The latest articles are always on the end of the list.
http://www.TigersUnited.com/tech_tips/tips_rest.asp
Thank you Dan.
Steve
--
Steve Laifman
Editor
http://www.TigersUnited.com
|