--part1_6a.7f54c5a.272f5972_boundary
--part1_6a.7f54c5a.272f5972_boundary
Content-Disposition: inline
Return-path: <H2Otor@aol.com>
From: H2Otor@aol.com
Full-name: H2Otor
Message-ID: <aa.c72fafa.272e43cc@aol.com>
Date: Sun, 29 Oct 2000 22:23:56 EST
Subject: RE Generator bushings
To: tigers-digest@autox.team.net
MIME-Version: 1.0
X-Mailer: Windows AOL sub 115
When I had my generator apart I replaced the bushings, bearings,
and I also had the armatures commutator 'turned down' and undercut
by the local Alternator Generator repair shop. Doing this will remove
the ridge on the commutator and true it up. I found a shop that
still had an armature lathe and he did it for around $5.00 that was
5 years ago.
Good luck
John W.
B9470515
--part1_6a.7f54c5a.272f5972_boundary--
|