Thanks for the advice. I was able to remove the grills using a combination
of prying and a wire loop around the center rib and a liberal doucing with
Liquid Wrench.
--Arden
> -----Original Message-----
> From: Stu Brennan [mailto:sbrennan@master.ncounty.net]
> Sent: Monday, August 07, 2000 7:39 PM
> To: Jane & Arden Bedell; Tiger Email Network
> Subject: Re: Heater box grill removal
>
>
> The grills are held in by two pins at the left/right ends of the grills,
> that go into some springy receivers in the cowl. I got mine out with a
> hook like tool made out of a coat hanger. The hook goes down into the
> slots, then you gently pull up at the ends, from the back. No damage to
> the front. Pull up near the pins at the ends, rather than in the
> middle. It worked for me, but there may be other ideas floating around.
>
> Stu
|