The grills are held in by two pins at the left/right ends of the grills,
that go into some springy receivers in the cowl. I got mine out with a
hook like tool made out of a coat hanger. The hook goes down into the
slots, then you gently pull up at the ends, from the back. No damage to
the front. Pull up near the pins at the ends, rather than in the
middle. It worked for me, but there may be other ideas floating around.
Stu
Jane & Arden Bedell wrote:
>
> I like the #4-40 panhead screw idea, but thanks everybody for *all* the
> great suggestions.
>
> Here's another one: how do the heater box grills come out (the ones at the
> base of the windshield just behind the trailing edge of the hood)? They
> appear to be stamped from some petty flimsy sheet steel so prying is
> contrindicated until I'm sure.
>
> --Arden
|