tigers
[Top] [All Lists]

RE: HELP harness wiring ???

To: "'Wally Menke'" <wallym@ozemail.com.au>,
Subject: RE: HELP harness wiring ???
From: "Parfitt, Bill @ PDX" <BParfitt@GlacierNW.com>
Date: Wed, 23 Feb 2000 01:00:38 -0800
WALLY, BOB & LISTERS,

     i got a harness through sunbeam specialties. I believe it was more than
$150 however. Bill

-----Original Message-----
From: Wally Menke [mailto:wallym@ozemail.com.au]
Sent: Wednesday, February 23, 2000 2:13 AM
To: Bob Palmer; tigers@autox.team.net
Subject: Re: HELP harness wiring ???


At 06:47 10/02/00 -0800, you wrote:
>Don,
>
>I have heard there are new wiring harnesses available, although I don't 
>know offhand where. I'd check the usual suspects like Sunbeam Specialties, 
>etc. You might be a lot better off replacing the old harness in terms of 
>effort and reliability. I would expect the new harness to run in the 
>neighborhood of $100-150, but that's just a guess. Maybe some else on the 
>List can provide more details.
>
>Bob
>
>Robert L. Palmer
>UCSD, Dept. of AMES
>619-822-1037 (o)
>760-599-9927 (h)
>rpalmer@ucsd.edu
>rpalmer@cts.com
>rlpalmer@lyonlyon.com
>
>
>
Dear Bob

I had a new wiring harness made up here locally where I got the guy to fit
in a proper FUSE BOX that will go in under the dash. As Mr Smith did not
think fuses were usefull, and smoking wires were better I though this would
be a useful modification. The original 32 amp fuses will be resigned as a
wall mounted relic in the garage. Price was higher than USD 150, but cheaper
than a burn-out.


Cheers
Wally Menke DownUnder

<Prev in Thread] Current Thread [Next in Thread>