Thanks guys! Now I can give my Electrical Subcontractor the green light.
Anyone interested in an original vinyl dash. I have a really cool new dash
made of teak from an old Chris Craft boat. Hope it works out and is a good
fit.
Tim
----- Original Message -----
From: Steve Laifman <Laifman@Flash.Net>
To: tjordan <tjordan@wagnerprocess.com>; tigers <tigers@autox.team.net>;
Laifman, Jay <Jay_Laifman@countrywide.com>
Sent: Friday, February 11, 2000 4:19 AM
Subject: Re: HELP harness wiring ???
> Steve Laifman wrote:
>
> > So, if the back is metal, and it is firmly against the metal supports,
it 'could'
> > be used for the instrument lights, but the indicator lights probably
still had two
> > wires, so the other needed to be grounded somewhere.
> >
> > More later, after Jay confirms this, as he has had the S2, S3, S4, S5
and the GT
> > versions pass through his hands, although I do not know how well he
remembers the
> > dash wiring.
> > --
> > Steve Laifman
>
> So, the "Master" has spoken. Jay says that Rootes, in their mad desire
for quality
> and excellence, have made the Alpine vinyl backing of plastic, and that
the 'daisy
> -chain' wiring for a ground is used on Alpines as well.
>
> Then the correct answer, to your earlier question, on the early pebble
grain dash
> Tiger, is yes, you do need the loop-de-loop's.
>
> Steve & Jay
>
>
> --
> Steve Laifman < Find out what is most >
> B9472289 < important in your life >
> < and don't let it get away!>
>
> _/_/_/_/_/_/_/
> _/ _/_/_/ _/_/_/ _/
> _/ _/ _/ _/ _/ _/ _/_/_/_/
> _/ _/ _/ _/ _/ _/ _/
> _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> _/
> _/_/_/
>
|