I just put an E-F4B on my Tiger this past year. Granted, they are getting
rarer, but you should be able to find them off the web; Hemmings is where I
remember seeing them. I got mine from B&C Mustangs - Chris Williams is a
lurker on this list. It looked like he blasted it before installing it for me
- it was beautiful, and about $150 as I recall.
Best of luck to you -the E-F4B is really the best manifold for your Tiger as
far as I can tell...
Chris Thompson
Executive Vice President
Recognition Research, Inc.
1750 Kraft Dr. Suite 2000
Blacksburg, VA 24060
540.961.6500
540.961.3568/fax
cthompson@rrinc.com
www.rrinc.com
B382000331
-----Original Message-----
From: mckinsey@texas.net [SMTP:mckinsey@texas.net]
Sent: Thursday, July 22, 1999 7:37 PM
To: Tiger List
Subject: Maniford
I am putting an SVO 302 engine in my Tiger II. I would like to use an
Edlebrock F4B manafold and a Holly 650 double pumper with center pivot
floats; however, finding an Edlebrock F4B is virtually impossible.
I called Edlebrock for a recommendation on a newer manifold -- one that had
performance characteristics at least as good as the F4B with similar rise
measurements so it would fit under the hood without modification. To my
great surprise, Edlebrock said they no longer had any data on the F4B; they
claim to have lost it in the earthquake.
I have Charlie Price at 'Vintage Racing' looking for an F4B, but that may
take forever. I could also take the F4B off my race Tiger, but I really
don't want to do that.
Does anyone have any recommendations? Will the Edlebrock Performer RPM
302, the one with 4.30" x 5.50" rise measurements, with a Holly 650 double
pumper and an air filter fit under a Tiger hood?
CHEERS,
BILL
|