Bob said:
>Sounds like maybe you have a cross fire between wires
that's happening since you moved them. When compression goes down at higher
rpms it stops??
A good idea, Bob. You can actually look under your hood at night and see cross
fire, if it's there without road load. BTW: If you are using Pertronix, instead
of those messy points, it is stable as h---, and doesn't ever need dwell
adjusting. Can be used with any MSD cap discharge system, but if you are just
using a "Hot" coil, make sure it is the kind specified for "points type igniton"
or the current will be two high for the electronics. I used an MSD coil, but
had to use their supplied resistor to get the voltage right. Pertronix also
sells a coil. Again, won't matter with a CD system.
Steve
--
Steve Laifman < One first kiss, >
B9472289 < one first love, and >
< one first win, is all >
< you get in this life. >
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|