Allen,
I bought the higher end Accel 8.8 Silicone Wires, with the Spiracore metal
center and radio suppression. Cost a lot. These came pre-made for the Ford
V-8, but they didn't label which went where. Bottom line, they were all too
long for the stock routing. Wrapped a few around the steering gear, but maybe
that's where they are supposed to go {8->. The end spark plug boots were long
straight cylinders, and I had tro trimm off some of the end rubber to get them
on that last plug. The distributor ends were pre-bent right angles, and worked
fine.
If I had it to do over again, I would still buy the Accel Spiracore 8.8
Silicone, but this time the "Universal V-8" set with right angle boots at the
plug and distributor. I 'd crimp the ends on when I've routed them the way I
wanted.
Steve
--
Steve Laifman < One first kiss, >
B9472289 < one first love, and >
< one first win, is all >
< you get in this life. >
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|