So I am poking around for SU AUD 136 carbs to fit my 1098 junkyard
motor that came with no carbs. I found some on Ebay that looked ok in
pictures and bought them, a few hours later the seller said he didn't
have them, that was a old listing that Ebay had put back up accidentally.
 There are a few other listings, some missing parts and one saying many
moveable parts are stuck, well that is what was wrong with a set a carbs
i got from a friend, everything stuck and too badly corroded to ever
work again...major pits in venturi area by the butterflies on one and
pistons on both...way too bad for a rebuild.
 There are some on ebay that claim to be rebuilt for a 1098cc motor but
they are not AUD 136's so I am not sure what will and will not work,
they all kind of look the same to me, I just know my motor had AUD
136t's originally.
 Anyone have a set to sell ? ideally something with nothing frozen and
a decent throttle shaft since I don't have the ability to ream and put
bushings in (although i know there are o-ring shafts now that may solve
that problem).
 I do have a manifold, not sure its the right one but it fits, it does
not have the port for the PCV valve which I think is correct for 1098,
this is not a show car, I just want a good driver.  I have seen that
Mo$$ has new ones...yike$ and there is a advantage to that since I would
not need to buy a rebuild kit.
    Mike
--
A gun is like a parachute, if you need one but don't have it,
you'll probably never need one again.
------------------------
spridgets@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75
Archive: http://www.team.net/pipermail/spridgets http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/mharc@autox.team.net
|