----- Original Message -----
From: "brian S" <bugeye15@hotmail.com>
To: "spridgets list" <spridgets@autox.team.net>
Sent: Tuesday, June 16, 2009 8:56 AM
Subject: Re: [Spridgets] Crankshaf tpulley bolt
Leo,
I did mine in Frank's driveway a month ago.
As larry said, if you take the pan off,
put a 2x4 between the block and crank.
Or as I did, use a breaker bar, put it against
the frame, and bump the starter to break it loose.
Brian S.
Bugeyeracer finally resto'ed!
==================
To avoid an incredible amount of embarrassment, double check that the
ignition is off before bumping that starter!!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|