alright, Thanks! how much do you want to sell for?
On Wed, Nov 5, 2008 at 12:59 PM, David Lieb <dbl@chicagolandmgclub.com>wrote:
> There's no real machining to speak of, you have to CENTER the Datsun
>> clutch plate and redrill and tap the holes for the clutch cover bolts and
>> locator pins. Done.
>> Paul did the one for my Sprite and I'm doing the one I've got for the
>> Morris.
>>
>
> Nope. Wrong again ;-)
> This is a Rivergate kit. It uses the stock Spridget clutch pressure plate
> (with a custom clutch disk). The difference is probably the seal kit for the
> rear main bearing which is incorporated into the adapter plate. Might want
> to call Bill Perry at Rivergate and ask.
> David Lieb _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as mhagopian@hoppetool.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
--
Sincerely,
Matt Hagopian
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|