Yup. That's the flare that's on my lines.
Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa/
On Oct 12, 2008, at 8:07 PM, Dean Hedin wrote:
> Right, the problem is not the silicone fluid.
>
> One possibility is that Phil has the wrong type (or poor quality)
> flairs on his new brake line.
>
> Phil do the ends of your brake line look like this?
>
> http://www.projet-tr4.org/photos/small/brake3.jpg
>
> A corroded fitting will also cause trouble.
>
>
> ----- Original Message ----- From: "Frank Clarici" <spritenut@comcast.net
> >
> To: "Larry & Sandi Miller" <millerls@ado13.com>
> Cc: <spridgets@autox.team.net>
> Sent: Sunday, October 12, 2008 7:18 PM
> Subject: Re: [Spridgets] FW: Weepy fittings at MC
>
>
>> Larry & Sandi Miller wrote:
>>>> Don't use silicone brake fluid! .bill in Oregon
>>>
>>> BS, I've used silicone in sprites as long as I can remember. I
>>> have never had any problems with it.
>>>
>> I agree, I have been using silicone for over 10 years, never a
>> problem except for the slave on the A40 and the slave on my 5 speed
>> Sprite both of which were 10 years old when they needed replacement.
>> This sure beats 3-5 years with LMA.
>> --
>> Frank Clarici
>> Toms River, NJ
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> You are subscribed as dlh2001@comcast.net
>> http://www.team.net/archive
>> http://autox.team.net/mailman/listinfo/spridgets
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as nases@verizon.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|
