Matt Hagopian wrote:
----------------------------------------------------------------
--------
i just looked on his website, you were right, re-keyed to 102 degrees.
cam is an APT scatter...? no model number mentioned.
beside this.. I have a 1.5 high lift rockers (that have a small crack
in them) anyone have any suggestions which rocker to use?
Matt,
There aren't many options for aluminum 1.5 roller rockers anymore. One
variety has needle bearings in the bore, and a cheaper version has a
bushed bore, they both have rollers on the valve end. There is a high
quality set imported from the UK, and I only know of the two
manufacturers. You have to call some of the suppliers to see whats
available. APT, Seven Enterprises, Sports & Imports, and Mini-Mania
are suppliers for race parts I have used. Be prepared for sticker
shock on the rocker arms, recently I saw the UK aluminum roller &
needle bearing 1.5 rockers selling for $795/set.
I wouldn't use that cracked rocker any longer. I once had an aluminum
rocker break, and the remaining stub pressed on the retainer causing
the keepers to fall out, and you know the rest...
John
Fogelsville, PA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|