spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Spridgets] Air pump ports

from [derf] [Permanent Link][Original]
To: "Bud Osbourne" <abcoz@hky.com>
Subject: Re: [Spridgets] Air pump ports
From: derf <derf247@gmail.com>
Date: Thu, 21 Aug 2008 20:20:26 -0600 
I've plugged with both 1/8" Pipe threads and 7/16" fine.  They are
very close and either will plug the holes.
But, the 1/8" Pipe thread Allen plugs look better.
Pipe threads are tapered.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Spridgets] key blank, lindalnhvt
Next by Date:  Re: [Spridgets] Air pump ports, Larry Daniels
Previous by Thread:  Re: [Spridgets] Air pump ports, John D. Caffrey
Next by Thread:  Re: [Spridgets] Air pump ports, Larry Daniels
Indexes:  [Date] [Thread] [Top] [All Lists]