Remember first reply.. dizzy is 180 degrees out... guess what, dizzy
is 180 degrees out..
Lester
On Aug 10, 2008, at 9:31 AM, Joe Lansing wrote:
> OK - I tried using a plug wire straight to #1 from coil. It did not
> fire. I pulled the plug and turned it over, and there was spark at
> the gap. I'll try a new coil. But one question - could my engine
> builder have re-assembled with the cam so far out of time with
> everything that it won't run? I'm pretty sure it isn't, as when #1
> is TDC, both valves for #1 are open, distributor drive shaft slot is
> at 2:00.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|